Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.
V850/SC2 Microcontrollers
Features
- Operating Voltage : 3.5 to 5.5 V
- Max. frequency : 18.87 MHz
- ROM capacities :
- 512 KB mask ROM (µPD703069Y)
- 512 KB flash memory (µPD70F3089Y)
- RAM capacities : 24 KB
- Package : 144-pin plastic LQFP (20 x 20 mm)
- Number of instructions: 74
- Minimum instruction execution time :
- 53 ns (operating at 20 MHz, external power supply 5 V, regulator output 3.3 V)
- General-purpose registers 32 bits x 32 registers
- Instruction set :
- Signed multiplication (16 x 16 -> 32): 106 ns (operating at 18.87 MHz)
(Able to execute instructions in parallel continuously without creating any register hazards)
- Saturated operations (overflow and underflow detection functions are included)
- 32-bit shift instruction: 1 clock
- Bit manipulation instructions
- Load/store instructions with long/short format
- Memory space :
- 16 MB of linear address space (for programs and data)
- External expansion: Expandable to 4 MB
- Memory block allocation function: 2 MB per block
- Programmable wait function
- Idle state insertion function
- External bus interface :
- 16-bit data bus (address/data multiplexed)
- Address bus: Separate output possible
- 3 V to 5 V interface enabled
- Bus hold function
- External wait function
- Interrupts and exceptions :
- Non-maskable interrupts: 2 sources
- Maskable interrupts: 51 sources
- Software exceptions: 32 sources
- Exception trap: 1 source
- I/O lines :
- Total 124 (12 input ports and 112 I/O ports)
- 3 V to 5 V interface enabled
- Timer/counter :
- 16-bit timer: 8 channels (TM0, TM1, TM7 to TM12)
- 16-bit timer: 2 channels (TM5, TM6)
- Watch timer :
When operating on subclock or main clock: 1 channel
Operation using the subclock or main clock is also possible in the IDLE mode.
- Watchdog timer : 1 channel
- Serial interfaces (SIO):
- Asynchronous serial interface (UART)
- 3-wire serial I/O (CSI)
- I2C bus interface (I2C)
- 8- to 16-bit variable-length serial interface
- CSI (8-bit)/UART: 1 channel
- CSI (8- to 16-bit variable)/UART: 1 channel
- CSI (8-bit)/I2C: 2 channels
- CSI (8- or 16-bit): 2 channels
- UART: 2 channels
- Dedicated baud rate generator: 5 channels
- A/D converter 10-bit resolution: 12 channels
- DMA controller : Internal RAM <-> on-chip peripheral I/O: 6 channels
- ROM correction : 4 correction addresses specifiable
- Regulator : 3.5 V to 5.5 V input -> internal 3.3 V
- Key return function : 4 to 8 pins selectable, falling edge fixed
- Clock generator :
- During main clock or subclock operation - 5-level CPU clock (including sub operations) - Power save functions : HALT/IDLE/STOP modes
- CMOS structure : All static circuits
Product Table
Matching devices: 1