Please note that JavaScript and style sheet are used in this website,
Due to unadaptability of the style sheet with the browser used in your computer, pages may not look as original.
Even in such a case, however, the contents can be used safely.

Products > Digital AV LSI > MPEG Decoder for STB >

EMMA3SV (µPD61300, µPD61303)

High Performance MPEG Decoder LSI for Integrated Digital Television

Overview

The EMMA3SV (µPD61300, µPD61303) decoders embed video display functions and all of the necessary functions for reception of digital broadcasts, including audio and video digital signal decoding, into one single-chip solution.

EMMA3SV decoders can process the leading-edge H.264 video format, in addition to advanced audio standards such as Dolby® Digital Plus and HE-AAC, and offer on-chip USB and Ethernet connectivity for overall system cost reduction. These devices are ideal for televisions and STBs in Europe, Russia, India, and Brazil, where the H.264 format is gaining popularity.

Target System

H.264 iDTVs, STBs
IPTV in STB or integrated TV

Product Specification

Product Specification
Integrated high-performance CPU	MIPS32™ 24KEc™ CPU 470 MIPS at 327 MHz 16 KB instruction cache; 16 KB data cache
Unified memory interface	DDR2 memory interface 16-, 32-bit bus 32 to 256 MB total memory 2.6 GB/s bandwidth Flash ROM interface 64 MB total address area 8-, 16-bit bus
MPEG transport stream processing engine	Four dedicated transport stream input ports: two serial and two parallel MPEG2-TS (DVB) format 36 PID filters 32 section filters
MPEG video decoder	MPEG2 MP@ML, MP@HL, H.264/AVC HP@L4.0, MP@L4.0, 3.2, and VC-1 AP@L3, L2 formats
Audio controller	MPEG-1/2 L1/2, MPEG4 AAC, MPEG4 HE-AAC, DD, DD+, MP3, and WMA formats SPDIF output 5.1-ch output
Graphics and display engine	2DBitBlt Six graphics planes (five main planes and one sub-plane) 256-level alpha-blending function Real-time video scaling (1/4 to 8/1 H/V) x2
Video decoder	Two D/A converters for analog Y/C and CVBS video output PAL, SECAM and NTSC formats ITU-R BT.656 and BT.1120 digital output
USB 2.0 interface	Compliant with EHCI specification High (480 Mbps), full (12 Mbps), and low speeds (1.5 Mbps)
Ethernet interface	Integrated Ethernet MAC conforming to IEEE 802.3/3u/3x Compliant with RMII (10 Mbps/100 Mbps Ethernet) specification
Peripherals	Two-channel FUART One-channel UART Two-channel SmartCard interface Two-channel I²C interface Clocked serial interface Two-channel IR receiver; IR blaster Watchdog timer, real-time clock
Package	559-pin plastic BGA

Block Diagram

Product Lineup

T.B.D

Trademark

This device is protected by U.S. patent numbers 5,583,936; 6,516,132; 6,836,549; and 7,050,698, and other intellectual property rights. The use of Macrovision's copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.
This Device can only be sold or distributed to Authorized Buyers.