EMMA2SP (µPD61126, µPD61128)
High Performance MPEG Decoder LSI for digital Set Top Box and digital Television market with enhanced security
Overview
The high-performance and cost-effective EMMA2SP (µPD61126 and µPD61128) decoders are targeted to mid-end digital STBs and iDTVs requiring enhanced security for the next generation of Pay TV STBs in satellite, cable, terrestrial and DSL applications. Additional features include
- Connectivity expansion via PCI bus, making the implementation of additional functionalities, including DOCSIS STBs, possible
- USB 1.1 full speed interface that enables both faster code development and connection to external plug-in devices, including flash memory cards and cable modems
Target System
- STBs/iDTVs with security features
Product Specification
|
Product Specification
|
|
Integrated High Performance CPU
|
- MIPS32® 4KE® Core x 2
- Main CPU: for Application, RTOS, API, BIOS
- 286 MIPS at 187 MHz
- MIPS32® instruction
- Cache size : I-Cache 8 Kbytes, D-Cache 8 Kbytes (Cache accessing for 2 ways)
- Sub CPU: for MPEG decoder inside F/W (Audio/Video decode, AV-sync)
- 286 MIPS at 187 MHz
- MIPS32® instruction
- Cache size : I-Cache 8 Kbytes, D-Cache 8 Kbytes, Scratch Pad 16 Kbytes
|
|
ROM Interface
|
- Supports NOR, NAND type
- Supports 64 Mbytes space for ROM area
- 4-chip select signals (Maximum)
- 4M/8M/16M/32M/64M modes for each chip select
- 16 bits and 8 bits bus width support
|
|
SDRAM Interface
|
- Following DDR/SDR SDRAM support
- 128/256/512 Mbits /1 Gbit x 16
- 16 Mbytes - 128 Mbytes memory area support
- 16-bit bus width
- 1-chip select signal
- 166 MHz frequency
|
|
General I/O Interface
|
- Supports Motorola and Intel mode
- 8-bit/16-bit bus width
- 4-chip select (maximum) signal
|
|
MPEG Stream Processor
|
- NEC Electronics original processor core for software architecture
- MPEG2-TS Support
- 36 PID (include Video PID x 1, Audio PID x 2, PCR PID x 1)
- 32 Section Filter with 8-byte/16-byte depth
- HSD output (Filtered TS, De-scrambled TS)
- DVB de-scrambler supported
|
|
MPEG Video Decoder
|
- MPEG2 MP at ML x 1 decoding support
- MPEG2/1 elementary stream accepts
- I-flame still video decoding support
|
|
Audio Decoder
|
- MIPS32® 4KE® core : 286 MIPS at 187 MHz
- MPEG1/MPEG2 layer 1, 2 decoding support
- Dolby® Digital 5.1-ch down-mix decoding support
- Test tone generator
- S/PDIF (IEC60958) output
- PCM (L/R) output (x 2) and input (x 1)
|
|
Display
|
- 5 Graphics Plane Support
- Background plane
- Live Video plane for MPEG video (4:2.0, 4:2:2)
- Still plane (4:2:0, 4:2:2)
- 2 OSD planes (1, 2, 4, 8 bpp and 12, 15, 16, 32 RGB)
- OSD support various RGB format
- RGB12 alpha:R:G:B = 4:4:4:4
- RGB15 alpha:R:G:B = 1:5:5:5
- RGB16 R:G:B = 5:6:5
- RGB32 alpha:R:G:B = 8:8:8:8
- 256 level alpha blending between 5 planes
- Real Time Scaling for Live Video and Still planes
- x 1/4 to x 4 for both H (7-Tap) and V (3-Tap)
- Transparent Color in RGB mode supports
- Anti Flicker Filter for OSD (3 taps)
|
|
Graphics Engine
|
- 2D Bit-BLT engine
- Color Space conversion
- 32 RGB to YCbCr4:2:2
- YCbCr4:4:4 to YCbCr4:2:2
- YCbCr to RGB
- Color Expansion
- Porter-Duff Alpha compositing support
- X-Y Scaling (a scaling factor of 0.5x to 2x)
- Off line Anti Flicker Filter for RGB format map
|
|
Video Encoder
|
- NTSC and PAL (M, N, C) encoder
- SECAM Encoder
- Various VBI function support
- Closed Caption
- Teletext
- WSS
- Video ID
- VPS
- 6-DACs for CVBS, Y/C, Y/Cb/Cr video output
- Macrovision 7.1.L1
- CCIR-656 digital output
- Copy Guard (Only µPD61128)
|
|
DMA Controller
|
- SDRAM to SDRAM transfer
- Transfer between SDRAM and general I/O interface
|
|
Peripherals
|
- Standard UART x 2
- UART (16550 compatible) with 16-byte FIFO x 2
- Smart Card Interface x 2
- I2C x 2
- CSI x 1
- Programmable IO interface
- Supports IR Blaster/IR commander
- Timers
- Two system, Elapse, Watch Dog Timers
- Four timers supporting input capture timers and output compare timers
- USB 1.1 Interface
|
|
Process
|
|
|
Power Supply Voltage
|
- 1.5 V (internal), 2.5 V (DDR SDRAM I/F), 3.3 V (I/O)
|
|
Package
|
- 389-pin plastic BGA (22 x 22 mm)
|
|
Block Diagram
Product Lineup
T.B.D
This device is protected by U.S. patent numbers 5,583,936; 6,516,132; 6,836,549; and 7,050,698, and other intellectual property rights. The use of Macrovision's copy protection technology in the device must be authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is prohibited.
This Device can only be sold or distributed to Authorized Buyers.
725KB)